TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 410 of 1060

TM 5-5420-202-20-3

BASKET WIRING HARNESS DISCONNECT (Sheet 2 of 4)

REMOVAL:

NOTE

The following instructions show how to remove the top wiring

harness. If one of the lower wiring harnesses is to be removed, the

connectors for the wiring harnesses above that wiring harness to be

removed, must be removed first, using a spanner wrench.

NOTE

Tag all harnesses before removal.

1.

Using spanner wrench, loosen nut (A)

on connector (B) at back side of basket

disconnect.

2.

Remove connector (B).

3.

Using flat-tip screwdriver, remove four screws

(C) and lockwashers (D) securing connector (E)

on front side of basket disconnect. Remove

connector (E).

4.

Remove connector (E) from basket disconnect.

Go on to Sheet 3

5-72

10-296.70

Change 7