TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

  TM-5-5420-228-24 - Page 670 of 750

TM 5-5420-228-24
HEU VALVE BANK AND BRACKET REPLACEMENT (Sheet 2 of 4)
REMOVAL:
1.
Using 3/4 inch wrench, hold five nuts (A), and use 3/4 inch socket and ratchet to remove five screws (B) and
lockwashers (C).
2.
Using second technician, remove valve bank (D) and bracket assemblies (E) and (F) from vehicle.
3.
Place valve bank (D) and bracket assemblies (E) and (F) on a clean work area before removing any components.
4.
Using 3/4 inch socket and ratchet, remove four screws (G) and lockwashers (H) from bracket assemblies (E, F).
5.
Remove bracket assemblies (E, F) from valve bank (D).
6.
Inspect all parts for damage.
Replace as required.
Go on to Sheet 3
Change 3
4-74.1


Back to Top