TM 5-5420-228-24
RESERVOIR QUADRANT REPLACEMENT (Sheet 2 of 4)
REMOVAL:
1.
Using 7/16 inch socket, remove two screws (A)
and starwashers (B) from clamps (C). Throw
starwashers away.
2.
Using adjustable wrench on bushing (D), remove
bushing (D) with its attached parts.
Using 3/4 inch socket, remove seven screws (E)
and lockwashers (F). Throw lockwashers away.
Using 1-5/16 inch socket, remove four screws (G)
and lockwashers (H). Throw lockwashers away.
Attach sling and lifting device
CAUTION
Have a technician in vehicle watching
quadrant (K) is raised to insure hoses and
are not pulled out.
6.
Have technician operating hoist lift reservoir quadrant
while reservoir
wiring harnesses
to two handles (J).
(K) slowly from vehicle.
Go on to Sheet 3
TA251741
4-93