TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 680 of 750

TM 5-5420-228-24

SMOKE GRENADE DISCHARGER REPLACEMENT (Sheet 1 of 2)

TOOLS: 3/4 in. socket with 1/2 in. drive

6 in. extension with 1/2 in. drive

Ratchet with 1/2 in. drive

Slip joint pliers, conduit style, with plastic jaw inserts

Torque wrench with 1/2 in. drive (0-175 lb-ft)

SUPPLIES:

Thread locking compound (Item 7, Appendix D)

REMOVAL:

W

ARNING

Make sure there are no

grenades in dischargers.

dental firing of grenade

hurt or kill you.

NOTE

smoke

Acci-

could

Removal procedure is the same

for both the right and left dis-

chargers.

1.

Using pliers, disconnect wiring harness

connector (A) from receptacle on

back of discharger (B).

2.

Using socket, extension, and ratchet,

remove three screws (C) and washers (D)

securing discharger (B) to bracket (E).

3.

Take discharger (B) off vehicle.

Go on to Sheet 2

TA251746

4-98