TM-9-2320-260-20

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

APRIL 1995

TM-9-2320-260-20 - Page 120 of 1337

TM 9-2320-260-20

Table 2-1. Unit Level Preventive Maintenance Checks and Services (Contd).

ITEM

INTERVAL

ITEM TO

CHECK/

NOT FULLY

No.

PROCEDURE

SERVICE

MISSION

CAPABLE IF:

VEHICLE - CAB AREA

43

Semi-

Selector

Monthly, or every 1,000 mi (1,609 km), lubricate

annual

Levers

hinges and latches, transfer and power takeoff shift

linkage, fittings (5) on clutch and brake pedal linkage and

brake pedal yoke pin (6), hand brake lever, rear control

lever linkage, and dump truck tailgate bearings with

seasonal grade OE/HDO. Lubricate clutch and brake

pedal shaft bracket with GAA. If vehicle has not

accumulated 1,000 mi (1,609 km) in a 6-month period,

lubricate at time of preventive maintenance service.

COMPLETE VEHICLE - ABOVE

44

Semi- Wheel

a.

Check each tire for wear using tread depth gage.

annual

Tread depth should not be less that 1/8 in. (3.18 mm), as

indicated on tire tread depth (TM 9-2610-201-14).

Replace tire(s) worn beyond limit (para. 9-3).

b.

Refer to TM 9-2610-200-14 and TM 9-2610-201-14 for

specific instructions for matching tires and tire rotation.

c.

Inspect all wheel studs and capnuts for secure

One or more

mounting and missing parts (para. 9-3). Tighten capnuts

wheel studs or

450-500 lb-ft (610-678 N•m), if loose.

capnuts are

missing.

45

Semi-

Wheel

Inspect for loose condition. Adjust if loose (para. 9-6).

annual

bearings

2-33