TM-9-2320-272-23-2
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 2 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-2 - Page 477 of 1417
REMOVAL
1.
Install utility chain on two lifting brackets (Figure 13, Item 5).
2.
Install lifting device on chain. Raise lifting device enough to remove slack from chain.
3.
Remove three screws (Figure 13, Item 6), lockwashers (Figure 13, Item 7), and transmission mounting bracket
(Figure 13, Item 9) from transmission (Figure 13, Item 10) and isolator (Figure 13, Item 8). Discard lockwashers.
4.
Remove two locknuts (Figure 13, Item 16), washers (Figure 13, Item 17), and back plate (Figure 13, Item 18)
from studs (Figure 13, Item 20) and crossmember (Figure 13, Item 19). Discard locknuts.
5.
Remove two screws (Figure 13, Item 1), washers (Figure 13, Item 2), and isolators (Figure 13, Item 3) from
right engine mount bracket (Figure 13, Item 4).
6.
Remove two locknuts (Figure 13, Item 11), washers (Figure 13, Item 12), screws (Figure 13, Item 15), and
isolators (Figure 13, Item 13) from left engine mount bracket (Figure 13, Item 14). Discard locknuts.
TM 9-2320-272-23-2
0213
0213-16
Back to Top
