TM-9-2320-272-23-2
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 2 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-2 - Page 628 of 1417
OIL FILTER INSTALLATION
NOTE
•
Perform Steps (1) through (3) for oil filters on M939/A1 series vehicles and Steps (4) and
(5) for oil filters on M939A2 series vehicles.
•
Ensure correct filter is used during installation. Filter element and oil filter shell seal used
on the M939/A1 series vehicle engines are supplied as a kit. Early and late model engines
in M939A2 series vehicles use different filters.
1.
Install oil filter element (Figure 9, Item 1) in oil filter shell (Figure 9, Item 3).
2.
Install packing assembly (Figure 9, Item 5) and oil filter shell (Figure 9, Item 3) on filter base
(Figure
9,
Item
4). Hand-tighten center bolt (Figure 9, Item 2) until oil filter shell seats in filter base.
3.
Tighten center bolt (Figure 9, Item 2) 25 to 35 lb-ft (34 to 47 N·m).
M0013DAA
3
2
4
5
1
Figure 9.
Engine Oil Filter Installation.
TM 9-2320-272-23-2
0232
0232-9
Back to Top
