TM-9-2320-272-23-2
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 2 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-2 - Page 673 of 1417
INSTALLATION
1.
Install washer (Figure 2, Item 3) on injector (Figure 2, Item 2).
2.
Remove cleaning cloth from injector bore (Figure 2, Item 4).
NOTE
Coat injector and injector bore with clean diesel fuel.
3.
Position injector clamp (Figure 2, Item 6) into injector bore (Figure 2, Item 4) of cylinder head
(Figure
2,
Item
5).
4.
Install injector (Figure 2, Item 2) into injector bore (Figure 2, Item 4) of cylinder head (Figure 2, Item 5).
5.
Install injector clamp (Figure 2, Item 6) and injector (Figure 2, Item 2) on cylinder head (Figure 2, Item 5) with
screw (Figure 2, Item 1). Tighten screw 20 lb-ft (27 N·m).
4
M9034DAA
5
3
2
1
6
Figure 2.
Fuel Injector Installation.
END OF TASK
TM 9-2320-272-23-2
0238
0238-4
Back to Top
