TM-9-2320-272-23-2
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 2 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-2 - Page 668 of 1417
ACCESSORY DRIVE PULLEY INSTALLATION
1.
Apply a light coat of automotive and artillery grease to accessory driveshaft (Figure 9, Item 2).
NOTE
Perform Step (2) if dowel pin was removed.
2.
Install cotter pin (Figure 9, Item 1) in accessory driveshaft (Figure 9, Item 2).
3.
Install gasket (Figure 9, Item 5) in keyway of accessory drive pulley (Figure 9, Item 6).
4.
Install nut (Figure 9, Item 4) and washer (Figure 9, Item 3) in accessory drive pulley (Figure 9, Item 6).
2
1
6
5
4
3
M9666DAA
Figure 9.
Engine Accessory Drive and Pulley Installation.
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Install air compressor. (Volume 3, WP
0470)
2.
Install water pump drivebelt. (WP
0294)
3.
Install radiator. (WP
0281)
4.
Install power steering drivebelts. (Volume 3, WP
0504)
END OF TASK
END OF WORK PACKAGE
TM 9-2320-272-23-2
0237
0237-13/14 blank
Back to Top
