TM-9-2320-272-23-2
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 2 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-2 - Page 658 of 1417
ACCESSORY DRIVE REMOVAL
1.
Remove five screw assembled lockwashers (Figure 2, Item 3) from accessory drive front flange
(Figure
2,
Item
4). Discard screw assembled lockwashers.
2.
Using soft-faced hammer, loosen accessory drive housing (Figure 2, Item 2) and rubber strip
(Figure
2,
Item
1) from engine block gearcase (Figure 2, Item 5) and remove housing and rubber strip from
gearcase. Discard rubber strip and clean rubber strip remains from mating surfaces of accessory drive housing
and engine block gearcase.
2
1
5
4
3
M7101DAA
Figure 2.
Engine Drive Pulley Removal.
END OF TASK
TM 9-2320-272-23-2
0237
0237-3
Back to Top
