TM-9-2320-272-23-2
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 2 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-2 - Page 657 of 1417
ACCESSORY DRIVE PULLEY REMOVAL
1.
Remove nut (Figure 1, Item 4) and washer (Figure 1, Item 3) from accessory drive pulley (Figure 1, Item 6).
2.
Using mechanical puller, remove accessory drive pulley (Figure 1, Item 6) from accessory driveshaft
(Figure
1, Item 2).
3.
Remove gasket (Figure 1, Item 5) from accessory drive pulley (Figure 1, Item 6). Discard gasket.
NOTE
Perform Step (4) only if dowel pin is damaged.
4.
Remove cotter pin (Figure 1, Item 1) from accessory driveshaft (Figure 1, Item 2). Discard cotter pin.
2
1
6
5
4
3
M9665DAA
Figure 1.
Drive Pulley Removal.
END OF TASK
TM 9-2320-272-23-2
0237
0237-2
Back to Top
