TM-9-2320-272-23-2
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 2 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-2 - Page 747 of 1417
REMOVAL
1.
Remove clamp (Figure 1, Item 3) and air indicator tube (Figure 1, Item 1) from connector (Figure 1, Item 4).
2.
Remove connector (Figure 1, Item 4) from nipple (Figure 1, Item 2).
3.
Remove tiedown strap (Figure 1, Item 17) and tachometer drive cable (Figure 1, Item 18) from air intake ducting
(Figure 1, Item 7). Discard tiedown strap.
4.
Remove two nuts (Figure 1, Item 6), bracket (Figure 1, Item 5), and U-bolt (Figure 1, Item 14) from air intake
ducting (Figure 1, Item 7) and support bracket (Figure 1, Item 13).
NOTE
Tag spacers for installation.
5.
Remove two screws (Figure 1, Item 15), washers (Figure 1, Item 16), support bracket (Figure 1, Item 13), and
two spacers (Figure 1, Item 12) from cylinder head (Figure 1, Item 10).
6.
Remove two clamps (Figure 1, Item 8) and air intake ducting (Figure 1, Item 7) from turbocharger
(Figure
1,
Item
9) and pipe (Figure 1, Item 11).
1
2
2
4
5
6
7
8
9
10
11
1
12
13
14
8
15
16
18
17
M0034DAA
Figure 1.
Air Cleaner Hose Removal.
END OF TASK
TM 9-2320-272-23-2
0248
0248-2
Back to Top
