TM-9-2320-272-23-2

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 2 OF 5

SEPTEMBER 2012

TM-9-2320-272-23-2 - Page 887 of 1417

REMOVAL

1.

Remove locknut (Figure 1, Item 9), screw (Figure 1, Item 12), and clevis rod (Figure 1, Item 8) from throttle

lever (Figure 1, Item 13). Discard screw and locknut.

2.

Disconnect return spring (Figure 1, Item 2) from accelerator rod (Figure 1, Item 1) and link assembly

(Figure

1, Item 6).

3.

While holding nut (Figure 1, Item 5), remove locknut (Figure 1, Item 7) and accelerator rod

(Figure

1,

Item

1) from link assembly (Figure 1, Item 6). Discard locknut.

NOTE

Record position of accelerator rod in ball joint for installation.

4.

Loosen jamnut (Figure 1, Item 3) and remove ball joint (Figure 1, Item 4) from accelerator rod

(Figure

1,

Item

1).

5.

Remove spring pin (Figure 1, Item 10), clevis rod (Figure 1, Item 8), and spring (Figure 1, Item 11) from

accelerator rod (Figure 1, Item 1). Discard spring pin.

TM 9-2320-272-23-2

0268

0268-2