TM-9-2320-272-23-3
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-3 - Page 1061 of 1469
WHEEL AND TIRE REMOVAL
NOTE
•
Perform Step (1) for M939A2 vehicles only.
•
For individual wheel replacement refer to (TM 9-2320-272-10).
1.
Remove two nuts (Figure 1, Item 9) and wheel weights (Figure 1, Item 8) from two front wheels
(Figure
1,
Item
1) and studs (Figure 1, Item 7).
2.
Loosen 60 stud nuts (Figure 1, Item 3) on four rear wheels (Figure 1, Item 2) and two front wheels
(Figure
1,
Item
1).
3.
Raise vehicle and place two jack stands under rear-rear axle, two jack stands under forward-rear axle
(Figure
1,
Item
5), and two jack stands under front axle (Figure 1, Item 6).
NOTE
Tag wheels for installation.
4.
Remove 60 stud nuts (Figure 1, Item 3), two front wheels (Figure 1, Item 2), and four rear wheels
(Figure
1,
Item
1) from vehicle.
5.
Inspect tire assembly (Figure 1, Item 4) for cracks, stud hole damage, and bends. Replace tire assembly if
cracked, stud holes damaged or bent.
M5007DAA
1
2
3
4
5
3
6
9
8
7
Figure 1.
Wheel and Tire Removal.
6.
Inspect tires for tread wear (TM 9-2610-200-14).
END OF TASK
TM 9-2320-272-23-3
0485
0485-2
Back to Top
