TM-9-2320-272-23-3
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-3 - Page 1064 of 1469
FRONT WHEEL INSTALLATION
1.
Install two front wheels (Figure 4, Item 1) on studs (Figure 4, Item 2) with 20 stud nuts (Figure 4, Item 6). Hand-
tighten stud nuts.
2.
Raise front of vehicle, remove jack stands, and lower vehicle.
3.
Tighten 20 stud nuts (Figure 4, Item 6) 450 to 500 lb-ft (610 to 678 N·m) in sequence shown.
NOTE
•
Perform Step (4) for M939A2 vehicles only.
•
Install wheel weight with slot flush against rim nut.
4.
Install wheel weights (Figure 4, Item 4) on two front wheels (Figure 4, Item 1) and studs (Figure 4, Item 3) with
two nuts (Figure 4, Item 5). Tighten nuts 40 lb-ft (54 N·m).
1
2
3
4
5
6
7
8
9
10
M5011DAA
1
2
5
4
3
6
Figure 4.
Front Wheel Installation.
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Install front wheel valve. (WP
0393)
2.
Install rear wheel valve. (WP
0490)
END OF TASK
END OF WORK PACKAGE
TM 9-2320-272-23-3
0485
0485-5/6 blank
Back to Top
