TM-9-2320-272-23-3
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-3 - Page 1056 of 1469
INNER REAR WHEEL INSTALLATION
NOTE
•
Ensure inner rear wheels are installed so valve stems to both rear wheels are accessible.
•
Start all threaded nuts by hand to prevent cross-threading. Left wheels have left-hand
threaded wheel studs and right wheels have right-hand threaded wheel studs.
1.
Position four rear inner dual wheels (Figure 4, Item 1) on wheel hubs (Figure 4, Item 2).
WARNING
Apply proper torque to inner lug nuts. Failure to comply may result in damage to equipment,
injury, or death to personnel.
2.
Using inner wheel socket, install four rear inner dual wheels (Figure 4, Item 1) on wheel hub (Figure 4, Item 2)
with 40 inner wheel spacer nuts (Figure 4, Item 3).
WARNING
Apply proper torque to inner lug nuts. Failure to comply may result in damage to equipment,
injury, or death to personnel.
3.
Tighten spacer nuts (Figure 4, Item 3) 325 to 355 lb-ft (441 to 481 N·m) in sequence shown.
1
2
3
M5004DAA
1
2
3
4
5
6
7
8
9
10
Figure 4.
Wheel and Tire Installation.
END OF TASK
TM 9-2320-272-23-3
0484
0484-5
Back to Top
