TM-9-2320-272-23-3
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-3 - Page 1111 of 1469
INSTALLATION
1.
Install two tie rod boots (Figure 4, Item 3) and grease fittings (Figure 4, Item 5) on tie rod ends
(Figure
4,
Item
7).
NOTE
Use same number of turns recorded during removal of tie rod ends.
2.
Install two tie rod ends (Figure 4, Item 7) on tie rod (Figure 4, Item 10).
3.
Tighten two screws (Figure 4, Item 4) and nuts (Figure 4, Item 8) on clamps (Figure 4, Item 9). Tighten nuts
60 to 80 lb-ft (81 to 109 N·m).
4.
Install tie rod ends (Figure 4, Item 7) on left and right steering knuckle arms (Figure 4, Item 2) with two nuts
(Figure 4, Item 1). Tighten two nuts 160 to 180 lb-ft (217 to 244 N·m).
5.
Install two cotter pins (Figure 4, Item 6) on tie rod ends (Figure 4, Item 7) and nuts (Figure 4, Item 1).
10
M9162DAA
9
9
8
7
5
6
1
2
8
7
3
1
2
6
5
4
4
3
Figure 4.
Tie Rod Installation.
END OF TASK
END OF WORK PACKAGE
TM 9-2320-272-23-3
0493
0493-6
Back to Top
