TM-9-2320-272-23-3
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-3 - Page 1241 of 1469
INSTALLATION - Continued
NOTE
Long wheel base cargo models M927/A1/A2 and M928/A1/A2 do not use plates.
4.
Install crossmember assembly (Figure 15, Item 1) with two plates (Figure 15, Item 6) between frame rail
(Figure
15,
Item
5) and crossmember assembly and secure with six screws (Figure 15, Item 7) and locknuts
(Figure 15, Item 4).
5.
Install bushing to transmission support bracket and crossmember and secure with lockwashers and nuts
(WP
0361).
6.
Secure transmission support bracket to transmission (WP
0361).
7.
Align hole in fuel line bracket (Figure 15, Item 3) with hole marked A on left side of crossmember
(Figure
15,
Item
1) and secure with screw (Figure 15, Item 8) and locknut (Figure 15, Item 4).
8.
Install five screws (Figure 15, Item 7) and locknuts (Figure 15, Item 4) in left and right sides of crossmember
assembly (Figure 15, Item 1).
M3258DAA
1
2
3
4
5
6
7
8
Figure 15.
Crossmember Assembly and Plates Installation.
TM 9-2320-272-23-3
0513
0513-16
Back to Top
