TM-9-2320-272-23-3
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-3 - Page 1252 of 1469
FIELD MAINTENANCE
BUMPERETTE REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
Tool Kit, General Mechanic's: Automotive
(Volume 5, WP
0826, Table 1, Item 56)
Materials/Parts
Locknut (Volume 5, WP
0827, Table 1, Item 289)
Qty:
6
Equipment Condition
Parking brake set. (TM 9-2320-272-10)
REMOVAL
NOTE
Left and right bumperettes are replaced in the same way. Left bumperette shown.
1.
Remove four locknuts (Figure 1, Item 2) and screws (Figure 1, Item 7) from left hand frame rail
(Figure
1,
Item
1) and bumperette (Figure 1, Item 6). Discard locknuts.
2.
Remove two locknuts (Figure 1, Item 3), screws (Figure 1, Item 5), and bumperette (Figure 1, Item 6) from rear
crossmember (Figure 1, Item 4). Discard locknuts.
M5066DAA
5
4
3
2
1
7
6
Figure 1.
Bumperette Removal.
END OF TASK
TM 9-2320-272-23-3
0515
0515-1
Back to Top
