REMOVAL
WARNING
Weight of vehicle must remain supported on jack stands at all times. Do not attempt to support
weight of vehicle on hydraulic jack. Failure to comply may result in injury or death to personnel.
Remove eight locknuts (Figure 1, Item 4), screws (Figure 1, Item 2), and cross tube (Figure 1, Item 3) from
two rear axle bogie supports (Figure 1, Item 1). Discard locknuts.
M7097DAA
4
3
1
2
Figure 1.
Cross Tube Removal.
END OF TASK
TM 9-2320-272-23-3
0542
0542-2