TM-9-2320-272-23-3
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-3 - Page 1404 of 1469
FIELD MAINTENANCE
SHOCK ABSORBER AND MOUNTING PINS REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
Tool Kit, General Mechanic's: Automotive
(Volume 5, WP
0826, Table 1, Item 56)
Materials/Parts
Locknut (Volume 5, WP
0827, Table 1, Item 278)
Qty:
2
Materials/Parts (cont.)
Locknut (Volume 5, WP
0827, Table 1, Item 289)
Qty:
2
Rubber Bushing
(Volume 5, WP
0827, Table 1, Item 211)
Qty:
4
Equipment Condition
Parking brake set. (TM 9-2320-272-10)
REMOVAL
1.
Remove two locknuts (Figure 1, Item 1) and washers (Figure 1, Item 2) from mounting pins (Figure 1, Item 4).
Discard locknuts.
2.
Remove two rubber bushings (Figure 1, Item 3), shock absorber (Figure 1, Item 5), and two rubber bushings
(Figure 1, Item 3) from mounting studs (Figure 1, Item 4). Discard rubber bushings.
1
M9795DAA
2
3
4
4
3
5
2
1
Figure 1.
Shock Absorber and Mounting Pins Removal.
TM 9-2320-272-23-3
0543
0543-1
Back to Top
