TM-9-2320-272-23-3
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-3 - Page 175 of 1469
INSTALLATION - Continued
42.
Connect wire (Figure 15, Item 1) to transfer case switch capacitor lead (Figure 15, Item 2).
NOTE
Perform Step (43) for M936A2 vehicles only.
43.
Connect wire (Figure 15, Item 4) to 5th gear lock-up capacitor lead (Figure 15, Item 3).
44.
Connect wire (Figure 15, Item 5) to parking brake switch wire (Figure 15, Item 6).
45.
Connect front wiring harness connector (Figure 15, Item 15) to rear wiring harness connector
(Figure
15,
Item
12).
46.
Install four screws (Figure 15, Item 7), lockwashers (Figure 15, Item 11), and nuts (Figure 15, Item 10) on front
wiring harness connector (Figure 15, Item 15) and rear wiring harness connector (Figure 15, Item 12).
NOTE
Perform Step (47) for M929A2, M930A2, M931A2, M932A2, and M936A2 vehicles only.
47.
Connect wire (Figure 15, Item 14) to wire (Figure 15, Item 13).
48.
Connect three wires (Figure 15, Item 8) to high-beam selector switch (Figure 15, Item 9).
TM 9-2320-272-23-3
0358
0358-26
Back to Top
