TM-9-2320-272-23-3
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-3 - Page 760 of 1469
INSTALLATION
NOTE
•
If installing new governor, use fitting from old governor.
•
Wrap all male pipe threads with antiseize tape before installation.
1.
Install air governor (Figure 2, Item 1) on cab cowl (Figure 2, Item 9) with two washers (Figure 2, Item 5) and
screws (Figure 2, Item 6).
2.
Connect governor-to-compressor unloader line (Figure 2, Item 4) to adapter (Figure 2, Item 3).
3.
Connect governor supply air line (Figure 2, Item 2) and governor-to-horn supply line (Figure 2, Item 8) to tee
(Figure 2, Item 7).
1
9
8
7
6
5
4
3
2
M6241DAA
Figure 2.
Air Governor Installation.
END OF TASK
TM 9-2320-272-23-3
0436
0436-3
Back to Top
