TM-9-2320-272-23-3
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-3 - Page 783 of 1469
INSTALLATION
NOTE
•
If installing new reservoir, use old reservoir fittings.
•
Wrap all male pipe threads with antiseize tape before installation.
1.
Install reservoir (Figure 2, Item 5) on two clamps (Figure 2, Item 14) with clamps (Figure 2, Item 12), screws
(Figure 2, Item 11), and locknuts (Figure 2, Item 13).
2.
Install two screws (Figure 2, Item 11) and locknuts (Figure 2, Item 13) on clamps (Figure 2, Item 12).
3.
Connect treadle valve supply line (Figure 2, Item 3) to adapter (Figure 2, Item 4).
4.
Connect supply line (Figure 2, Item 2) to adapter (Figure 2, Item 4).
5.
Connect primary relay valve supply line (Figure 2, Item 1) to elbow (Figure 2, Item 10).
6.
Connect drain line (Figure 2, Item 8) to elbow (Figure 2, Item 9).
7.
Connect wet reservoir supply line (Figure 2, Item 6) to elbow (Figure 2, Item 7).
5
6
7
8
9
10
1
2
3
4
11
12
13
5
13
14
11
13
12
13
11
M6230DAA
Figure 2.
Air Reservoir Installation.
END OF TASK
TM 9-2320-272-23-3
0440
0440-4
Back to Top
