REMOVAL
WARNING
When performing battery maintenance, ensure batteries are seated and clamped down, all
rubber boots are installed, clamps are well down on battery posts, and all battery cables lie
flat against top of batteries. Failure to comply may result in damage to equipment, injury, or
death to personnel.
Remove safety valve (Figure 1, Item 1) from adapter fitting (Figure 1, Item 2) at inlet side of reservoir
(Figure
1, Item
3).
1
M6199DAA
2
3
Figure 1.
Safety Valve Removal.
END OF TASK
TM 9-2320-272-23-3
0451
0451-2