INSTALLATION
NOTE
Apply sealing compound to all male pipe threads before installation.
1.
Install adapter (Figure 3, Item 3) and elbow (Figure 3, Item 4) on air dryer (Figure 3, Item 2).
2.
Route control air line (Figure 3, Item 7) from air dryer (Figure 3, Item 2) forward, install on air dryer elbow
(Figure 3, Item 4), and tighten nut (Figure 3, Item 1).
3.
Install tiedown straps (Figure 3, Item 5) on control air line (Figure 3, Item 7) as necessary.
4.
Install tiedown straps (Figure 3, Item 5) on control air line (Figure 3, Item 7) along frame rail (Figure 3, Item 6)
as necessary.
4
3
2
5
6
1
M10107DAA
Figure 3.
Governor Control Air Line Installation.
TM 9-2320-272-23-3
0461
0461-4