TM-9-2320-272-23-4

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 4 OF 5

SEPTEMBER 2012

TM-9-2320-272-23-4 - Page 1145 of 1393

INSTALLATION

NOTE

•

Wrap male pipe threads with antiseize tape before installation.

•

Remove plug from PTO (if present) before installing PTO oil hose adapter.

1.

Install PTO oil hose adapter (Figure 3, Item 7) on PTO (Figure 3, Item 2).

2.

Loosely install washer (Figure 3, Item 4) and screw (Figure 3, Item 3) in PTO (Figure 3, Item 2).

3.

Install gasket (Figure 3, Item 9) and PTO (Figure 3, Item 2) on transmission (Figure 3, Item 1) with two washers

(Figure 3, Item 6) and nuts (Figure 3, Item 5).

4.

Tighten screw (Figure 3, Item 3) and nut (Figure 3, Item 5).

5.

Remove plug from PTO oil hose (Figure 3, Item 8) and connect PTO oil hose to adapter (Figure 3, Item 7).

6.

Install screw (Figure 3, Item 10) and locknut (Figure 3, Item 12) on frame rail (Figure 3, Item 13) and bracket

(Figure

3, Item 11).

TM 9-2320-272-23-4

0728

0728-6