TM-9-2320-272-23-4
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 4 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-4 - Page 1153 of 1393
INSTALLATION
1.
Feed transmission select lever end of PTO control cable (Figure 3, Item 4) through rear of PTO control panel
(Figure 3, Item 15) and into grommet (Figure 3, Item 3).
2.
Attach PTO cable clevis (Figure 3, Item 13) to PTO control panel end of cable (Figure 3, Item 4) with nut
(Figure 3, Item 10).
3.
Install PTO cable clevis (Figure 3, Item 13) on PTO control lever (Figure 3, Item 1) with clevis pin
(Figure 3, Item 14), washer (Figure 3, Item 12), and cotter pin (Figure 3, Item 11).
4.
Install PTO control cable (Figure 3, Item 4) on PTO control panel (Figure 3, Item 15) with two screws
(Figure 3, Item 2), spacer (Figure 3, Item 5), clamp (Figure 3, Item 6), and two locknuts (Figure 3, Item 7).
5.
Install PTO control panel access cover (Figure 3, Item 8) on PTO control panel (Figure 3, Item 15) with six
screws (Figure 3, Item 9).
M9789DAA
6
7
8
9
10
11
12
13
14
15
5
4
3
2
1
Figure 3.
Transmission Control Cable Installation.
TM 9-2320-272-23-4
0729
0729-4
Back to Top
