TM-9-2320-272-23-4
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 4 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-4 - Page 1157 of 1393
REMOVAL
1.
Remove cotter pin (Figure 1, Item 11), washer (Figure 1, Item 12), and PTO control cable (Figure 1, Item 7)
from PTO select lever (Figure 1, Item 13). Discard cotter pin.
2.
Loosen nut (Figure 1, Item 2) and remove cable pin (Figure 1, Item 1) from PTO control cable
(Figure 1, Item 7).
3.
Remove two locknuts (Figure 1, Item 9), screws (Figure 1, Item 6), clamp (Figure 1, Item 5), PTO control cable
(Figure 1, Item 7), and spacer (Figure 1, Item 4) from bracket (Figure 1, Item 8). Discard locknuts.
NOTE
Perform Step (4) only if bracket requires replacement.
4.
Remove two screws (Figure 1, Item 3) and bracket (Figure 1, Item 8) from PTO (Figure 1, Item 10).
M9790DAA
6
7
8
9
10
11
12
13
5
4
3
2
1
Figure 1.
Transmission PTO Control Cable Removal (M939A2).
TM 9-2320-272-23-4
0730
0730-2
Back to Top
