REMOVAL
NOTE
Tag wires for installation.
1.
Remove four screws (Figure 1, Item 1) and upper cover (Figure 1, Item 2) from control center box
(Figure
1,
Item
6).
2.
Remove two screws (Figure 1, Item 3) and wires (Figure 1, Item 4) from terminal (Figure 1, Item 5).
M10224DAA
3
2
1
4
5
6
Figure 1.
Branched 400 Hz Receptacle Wiring Harness Removal.
TM 9-2320-272-23-4
0661
0661-2