TM-9-2320-272-23-4
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 4 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-4 - Page 702 of 1393
REMOVAL - Continued
3.
Rotate drive coupling (Figure 3, Item 9) to access cotter pin (Figure 3, Item 4). Remove pin and shear pin
(Figure
3,
Item
2) from drive coupling.
4.
Remove two nuts (Figure 3, Item 10), screws (Figure 3, Item 14), and washers (Figure 3, Item 13) from front
motor bracket (Figure 3, Item 12) and crane body (Figure 3, Item 11).
5.
Remove two nuts (Figure 3, Item 5), washers (Figure 3, Item 6), screws (Figure 3, Item 8), and washers
(Figure
3,
Item
6) from rear motor bracket (Figure 3, Item 7) and crane body (Figure 3, Item 11).
6.
Slide winch motor (Figure 3, Item 1) forward until clear of winch drive shaft (Figure 3, Item 3).
M5260DAA
1
2
3
4
5
6
7
6
8
9
10
11
12
13
14
Figure 3.
Rear Winch Removal.
TM 9-2320-272-23-4
0670
0670-3
Back to Top
