TM-9-2320-272-23-4
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 4 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-4 - Page 880 of 1393
REMOVAL - Continued
5.
Lift and tilt front winch (Figure 2, Item 1) until winch motor (Figure 2, Item 6) clears crossmember
(Figure
2,
Item
2).
CAUTION
When disconnecting hydraulic lines and hoses, plug all openings to prevent dirt from entering
and causing damage to internal parts.
NOTE
•
Have drainage container ready to catch oil.
•
Use drain pans to retain leaking/draining fluids. Refer to local procedures and plans for
preventing and responding to fluid spills or leaks. Comply with local regulations when
disposing of clean up material and leaked and spilled fluids.
•
Tag all hydraulic lines for installation.
6.
Disconnect hydraulic return hose (Figure 2, Item 4) and supply hose (Figure 2, Item 5) from elbows
(Figure
2,
Item 3) on winch motor (Figure 2, Item 6).
2
1
6
3
5
M5246DAA
4
Figure 2.
Front Winch Motor Removal.
TM 9-2320-272-23-4
0694
0694-3
Back to Top
