TM-9-2320-272-23-4
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 4 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-4 - Page 994 of 1393
DISASSEMBLY
NOTE
Perform Steps (1) through (5) if filter cover assembly needs to be repaired.
1.
Place filter cover (Figure 3, Item 7) with filter assembly (Figure 3, Item 9) on flat surface.
2.
Pull filter assembly (Figure 3, Item 9) straight up to separate from filter cover (Figure 3, Item 7).
3.
Remove preformed packing (Figure 3, Item 8) from filter cover (Figure 3, Item 7). Discard preformed packing.
4.
Remove three screws (Figure 3, Item 1), rear cap (Figure 3, Item 2), front cap (Figure 3, Item 5), and ring seal
(Figure 3, Item 6) from filter element (Figure 3, Item 9).
5.
Remove filter element (Figure 3, Item 3) from shroud (Figure 3, Item 4).
3
4
5
M9822DAA
1
2
6
9
8
7
Figure 3.
Hydraulic Crane Filter.
END OF TASK
TM 9-2320-272-23-4
0707
0707-5
Back to Top
