TM-9-2320-272-24-2

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL; VOLUME 2 OF 4

JUNE 1998

TM-9-2320-272-24-2 - Page 128 of 991

TM 9-2320-272-242

3-270. HOOD STOP CABLES REPLACEMENT

THIS TASK COVERS:

a. Removal

b. Installation

INITIAL SETUP

APPLICABLE MODELS

All

TOOLS

General mechanic’s tool kit (Appendix E, Item 1)

EQUIPMENT CONDITION

MATERIALS/PARTS

Two locknuts (Appendix D, Item 291)

REFERENCES (TM)

TM 9-2320-272-10

TM 9-2320-272-24P

Parking brake set (TM 9-2320-272-10).

Hood raised and secured (TM 9-2320-272-10).

NOTE

Both hood stop cables are replaced the same way.

This procedure covers one cable.

1.

Remove locknut (9), screw (6), washer (7), and hood stop cable (5) from radiator support bracket (8).

Discard locknut (9).

2.

Remove locknut (4), screw (1), washer (2), and hood stop cable (5) from hood bracket (3). Discard

locknut (4).

1.

Install hood stop cable (5) on radiator support bracket (8) with washer (7), screw (6), and new locknut (9).

2. Install hood stop cable (5) on hood bracket (3) with washer (2), screw (1), and new locknut (4).

3-736