TM-9-2320-272-24-2

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL; VOLUME 2 OF 4

JUNE 1998

TM-9-2320-272-24-2 - Page 132 of 991

TM 9-2320-272-24-2

3-273. CAB HOOD STOP BRACKET REPLACEMENT

THIS TASK COVERS:

a. Removal

b. Installation

INITIAL SETUP

APPLICABLE MODELS

REFERENCES (TM)

All

TM 9-2320-272-10

TOOLS

TM 9-2320-272-24P

General mechanic’s tool kit (Appendix E, Item 1)

EQUIPMENT CONDITION

MATERIALS/PARTS

Parking brake set (TM 9-2320-272-10).

Hood raised and secured (TM 9-2320-272-10).

Two locknuts (Appendix D. Item 291)

Shims (Appendix D, Item 652)

NOTE

This procedure applies to both left and right stop brackets.

Remove two locknuts (5), stop bracket (4), and shim (3) from firewall (2). Discard locknuts (5).

NOTE

Install original shim or new shims as required to establish proper

alignment between vehicle and stop bracket.

Install shim (3) and stop bracket (4) on firewall (2) with two new locknuts (5).

3-740