TM-9-2320-272-24-3

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL; VOLUME 3 OF 4

JUNE 1998

TM-9-2320-272-24-3 - Page 693 of 799

4-206. TRANSFER

TM 9-2320-272-24-3

4.

Apply a small amount of GAA grease to rounded edge of new woodruff key (17) and install on

cross shaft (11). Grease will hold woodruff key (17) in place.

5.

Insert cross shaft (11) into cross shaft lever (2) and install with screw (1) and new locknut (3).

NOTE

Assistant will help with step 6 through 8.

6.

Install rubber seal (27) and ring seal (28) on cab floor (26) with six screws (30) and new locknuts (25).

7.

Position cross shaft (11), cross shaft lever (2), and cross shaft retaining clamps (6) on cab floor (26).

8.

Install two shims (7) and cross shaft retaining clamps (6) on cab floor (26) with four screws (5) and

new locknuts (18).

9.

Install brake lock control valve rod (24) on cross shaft lever (2) with washer (31) and new cotter pin (29).

10.

Install PTO cable swivel bolt (22) on cross shaft lever (2) with new locknut (21).

11.

Install shim (10) and PTO control cable (23) on bracket (9) with clamp (20), two screws (8), and new

locknuts (19).

FOLLOW-ON TASKS:

Install driver’s seat (para. 3-283).

Check transfer case PTO for proper operation (TM 9-2320-272-10).

4-957