TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980

TM-9-2320-273-34 - Page 365 of 801

TM 9-2320-273-34

(6) Press

8-4. Cleaning. Wash

8-5. Inspection. All

the shaft from the front bearing cone (fig. 8-34).

Figure 8-34. Front Bearing Cone Disassembly.

TA 074227

all parts thoroughly in dry cleaning solvent (item 12, APP B).

parts should be inspected carefully for wear, damage, or other indications of short

service life. Replace any parts which are in questionable condition.

-

8-6. Assembly.

a. Assemble the Intermediate Shaft.

(7)

Place

(2)

Place

(fig. 8-35). Aline the

NOTE

It is recommended that the intermediate gear

be preheated by soaking in 150

0

F (66

0

C) oil

and the intermediate shaft surface be prelubri-

cated with molybdenum disulfade base lubri-

cant before assembly.

the case in a press with the front side of the case facing up.

the intermediate gear inside the case with the counterbore for the shaft facing up

gear with the intermediate shaft openings in the case.

8-25