TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980

TM-9-2320-273-34 - Page 368 of 801

TM 9-2320-273-34

(8)

On the front side of the case, apply silastic gasket material (item 29, App B) to the mating

surface for intermediate cover gasket. lnstall the gasket. Apply silastic gasket material to the outer surface

of the gasket and install the intermediate cover (fig. 8-39).

(9)

InstalI

40Ib-ft (54 N•om).

Figure 8-39. Intermediate Shaft Front Cover Installation.

TA 074232

four Iockwasher and nuts loosely. Oil the stud threads and torque the nuts to

(70) On the rear side of the case, install a 0.065 in. (1.65 mm) shim pack and the rear inter-

mediate shaft cover (fig. 8-40).

Figure 8-40 Intermediate Shaft Rear Cover Installation.

TA 074223

(77)

Install four Iockwasher and nuts loosely. Oil the stud threads and torque the nuts to

40Ib-ft (54 NŽm).

(12) Check and adjust the intermediate shaft end play as follows:

(a) Tap the intermediate gear at the top and bottom from the front and rear of the

case to seat the bearings.

(b) Rotate the gear and shaft to seat the bearing rollers.

8-28