TM9-2320-273-34
NOTE
One-sixth of a turn will change the pressure
setting by approximately 5 psi (35 kPa).
(c) Repeat steps (a) and
(b)
until the pressure setting is between 102 and 108 psi
(703-745 kPa).
(10) Close the air reservoir drain petcock (opened in step (9) and build up air pressure in system;
then repeat step (9) until pressure setting is between 102 and 108 psi (703-745 kPa). Close drain petcock.
(17)
(72)
(13)
(14)
Repeat steps (5), (6), and (7) to reset the cut-out pressure.
Tighten locknut (3).
Install cover (5).
Shut down engine (refer to TM 9-2320-273-10).
Section Ill. BRAKE SHOES
14-12. Brake Shoes.
a.
Brake shoes on the M915 series vechicles have two linings each, fastened onto the brake shoes
with rivets. Figure 14-43 shows the different types of brakes used along with their major components.
Figure 14-43 Brake Shoe Components.
TA 074393
14-41