(3)
Insert release stud through opening (where plug was removed
sert into pressure plate (fig. 14-47).
) in the chamber and in-
TA 074397
Figure 14-47. Inserting Release Stud.
(4)
Turn release stud 1/4turn clockwise in pressure plate to secure cross pin into cross pin
area of pressure plate and lock into manual release position.
(5) Assemble release stud washer and nut onto release stud (fig. 14-48).
Figure 14-48. Compressing the Compression Spring.
TA 074398
14-45
TM9-2320-273-34