TM9-2320-273-34
Section IV. SPRING BRAKE AIR CHAMBER
14-13. Removal.
Refer to TM 9-2320-273-20.
14-14. Disassembly.
a. Preparation.
(1) Clean the exterior of the entire spring brake air chamber.
(2) Before proceeding with disassembly, mark the chamber, clamp rings, adapter, and hous-
ing assembly in such a manner, that upon reassembly the same position of the parts can be determined
(fig. 14-45).
TA 074395
Figure
14-45
Mark the Spring Brake Air Chamber to Facilitate Reassembly.
b. Disassembly. (See figure 14-46.)
14-43