TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980
TM-9-2320-273-34

  TM-9-2320-273-34 - Page 630 of 801

TM9-2320-273-34
c.
Replace all cotter pins, springs, nuts, bolts, and washers during rebuild of the fifth wheel.
d.
Lubricate
17-4. Assembly (fig
a.
Assemble
all moving parts to be installed. (Refer to LO 9-2320-273-12.)
17-1).
lock jaws (25)
into plate (23).
b.
Install Iockpins (24) and cotter pins (26).
c.
Install yoke (10) and check for proper fit using a new kingpin. (fig. 17-2)
TA 074409
Figure 17-2. Check the Yoke Fit.
d.
If yoke does not go completely in, grind off the outside of the yoke (fig. 17-3).
TA 074410
Figure 17-3. Grind the Yoke to Fit.
17-3


Back to Top