TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980

TM-9-2320-273-34 - Page 648 of 801

TM9-2320-273-34

a.

Place eaualizer beam on work bench and cut rubber off one side of beam end bushing flush

with equalizer beam (fig. 18-7).

Figure 18-7. Cutting Off Rubber Bushing.

b.

Position the equalizer beam in a press. Using a suitable adapter as described in Table

Identification No. 1, press the end bushing out of the equalizer beam.

c.

(M915) Using adapter identification No.

3,

press the center bushing from the equa

TA 074418

18-1,

lizer beam.

18-11