TM9-2320-273-34
d.
Loosen the locknut on the drawkey (fig. 18-4) sufficiently to protect the drawkey threads,
then strike nut with brass hammer to loosen drawkey.
e.
Remove the nut and washer and remove the drawkey.
f
Drive the spring hanger pin out with a suitable drift and hammer.
9.
Remove the rear spring hanger nut, Iockwasher, bolt, and spacer.
h.
Lower the spring and saddle assembly from the frame.
TA 074415
Figure 18-4. Rear Spring and Saddle Assembly.
18-6