TM9-2320-273-34
18-3. Disassembly.
a.
Clamp the spring assembly in a vise (fig. 18-2). Remove the spring alinement clamps and remove
the center bolt.
TA 074413
Figure 18-2. Disassemble the Spring Assembly.
b.
Insert a long drift in the center hole and release the vise slowly.
c.
Remove the assembly from the vise and check for any broken leaves.
d.
Replace any broken leaf.
18-4. Assembly.
a.
Place the spring leaves in a vise.
b.
Insert a long drift in the center hole and slowly tighten the vise.
c.
Remove the drift and install the center bolt and nut. Torque to 75-85 Ib-ft (100-115 N.m).
18-3