TM-9-2320-280-20-3
TRUCK, UTILITY: M998 SERIES
TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3
JANUARY 1996
TM-9-2320-280-20-3 - Page 532 of 1168
11-184. AIR INTAKE COMPARTMENT PANELS REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
M997, M997A1, M997A2
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Two lockwashers (Appendix G, Item 182)
Two tapping screws (Appendix G, Item 283)
Manual References
TM 9-2320-280-24P
Equipment Condition
• Blower housing opened (para. 11-198).
• Front cover panel removed (para. 11-187).
1.
Remove six screws (2) from panel (3) and condenser fan housing (4).
2.
Remove three screws (5) and panel (3) from panel (7).
3.
Remove two tapping screws (1) from panel (7) and air intake assembly (14). Discard tapping screws (1).
4.
Remove two nuts (13), washers (12), screws (8), washers (10), lockwashers (9), and panel (7) from
body (11). Discard lockwashers (9).
1.
Install panel (7) on body (11) and air intake assembly (14) with two washers (10), lockwashers (9),
screws (8), washers (12), and nuts (13).
2.
Install panel (7) on air intake assembly (14) with two tapping screws (1).
3.
Install panel (3) on panel (7) and fan housing (4) with three screws (5).
4.
Secure panel (3) to fan housing (4) with six screws (2).
b. Installation
a. Removal
TM 9-2320-280-20-3
11-268
Change 2
FOLLOW-ON TASKS: • Close blower housing (para. 11-198).
• Install front cover panel (para. 11-187).
1
2
3
4
5
7
8
9
10
11
12
13
14
~
Back to Top
