TM 9-2320-280-34
6-4.
200 AMPERE ALTERNATOR (A0013036AA) TESTING AND REPAIR (Cont ’d)
22.
Remove four screws (2), lockwashers (1), and end housing (3) from stator (7) and drive end housing
(8).
Discard lockwashers (1).
23.
Remove seals (6) and (4) and bearing (5) from end housing (3). Discard seals (6) and (4).
24.
Remove nut (10), washer (11), and two spring washers (12) from insulator (13) and each of three stator
studs (14).
Remove insulator (13) from stator studs (14).
25.
Remove stator (7) and insulator (9) from drive end housing (8).
Remove insulator (9) from stator (7).
26.
Remove two brush leads (16) from diode trio panel (17) and remove four spacers (15), brush cover
(18), two brushes (20), and two brush gaskets (19) from brush holder (21).
Remove O-ring (22), plate
(23), and rubber gasket (24) from brush holder (21).
Discard O-ring (22) and rubber gasket (24).
27.
Remove two brush gaskets (19) from two brushes (20).
Discard brush gaskets (19).
6-30