TM-9-2320-283-13-P

ANTI-LOCK BRAKE SYSTEM (ABS) M915A1

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)

AUGUST 2012

TM-9-2320-283-13-P - Page 196 of 400

TM 9-2320-283-13&P

0024

0024-2

REMOVAL – CONTINUED

3.

Disconnect 1/2 in. (13 mm) red tube (figure 2, item 8) from elbow (figure 2, item 7), and remove hose

assembly (figure 2, item 1) from mountable tee (figure 2, item 2).

4.

Remove elbow (figure 2, item 7) and plug (figure 2, item 3) from mountable tee (figure 2, item 2), and

remove screw (figure 2, item 5), lockwasher (figure 2, item 4), and mountable tee (figure 2, item 2) from

top hole of right frame rail (figure 2, item 6).

Discard lockwasher (figure 2, item 4).

1

2

3

4

5

6

7

8

Figure 2. Mountable Tee on Right Frame Rail.

END OF TASK

INSTALLATION

NOTE

Apply pipe joint compound to NPT male pipe threads only.

4.

Apply pipe joint compound to male pipe threads, and install elbow (figure 2, item 7) and plug

(figure 2, item 3) on mountable tee (figure 2, item 2).

5.

Install mountable tee (figure 2, item 2) on top hole of right frame rail (figure 2, item 6) with new

lockwasher (figure 2, item 4) and screw (figure 2, item 5).

6.

Connect 1/2 in. (13 mm) red tube (figure 2, item 8) to elbow (figure 2, item 7).

7.

Apply pipe joint compound to male pipe threads, and install hose assembly (figure 2, item 1) on

mountable tee (figure 2, item 2).