TM-9-2320-283-13-P

ANTI-LOCK BRAKE SYSTEM (ABS) M915A1

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)

AUGUST 2012

TM-9-2320-283-13-P - Page 195 of 400

0024-1

TM 9-2320-283-13&P

0024

FIELD MAINTENANCE

MOUNTABLE TEE REPLACEMENT

1

2

3

4

5

6

7

8

9

10

INITIAL SETUP:

Tools

Tool kit, general mechanic’s (WP 0063, Table 2, Item 8)

Materials/Parts

Pipe joint compound (WP 0066, Item 6)

Two lockwashers (WP 0049, Item 6)

References

TM 9-2320-283-20

Equipment Condition

Air reservoirs drained (TM 9-2320-283-10).

NOTE

This task covers removal and installation of mountable tees located

on rear-rear axle and right frame rail.

REMOVAL

1.

Disconnect hose assembly (figure 1, item 7) and two tubes (figure 1, items 5 and 9) from elbow

(figure 1, item 6) and two adapters (figure 1, items 4 and 8) on mountable tee (figure 1, item 3).

2.

Remove elbow (figure 1, item 6) and two adapters (figure 1, items 4 and 8) from mountable tee

(figure 1, item 3) and remove bolt (figure 1, item 1), lockwasher (figure 1, item 2), and mountable tee

(figure 1, item 3) from top hole of rear-rear axle bracket (figure 1, item 10). Discard lockwasher

(figure 1, item 2).

Figure 1. Removing Mountable Tee from Rear-Rear Axle Bracket.