TM-9-2320-283-13-P
ANTI-LOCK BRAKE SYSTEM (ABS) M915A1
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)
AUGUST 2012
TM-9-2320-283-13-P - Page 185 of 400
TM 9-2320-283-13&P
0022
0022-5
1
2
3
4
5
6
7
8
9
1
2
3
4
5
INSTALLATION, SENSOR, REAR-REAR AXLE – CONTINUED
Figure 6. Installing Wheel Sensor and Mounting Bracket on Rear-Rear Axle.
CAUTION
To protect wheel sensor power cable, ensure split loom is positioned
through enlarged hole in brake spider during installation. Failure to
comply may result in damage to equipment.
4.
Install split loom (figure 7, item 2) on cable (figure 7, item 3), slide end of split loom (figure 7, item 2) into
hole (figure 7, item 4), and secure split loom (figure 7, item 2) to camshaft bracket (figure 7, item 5) with
two tie straps (figure 7, item 1).
Figure 7. Installing Split Loom on Wheel Sensor Cable.
Back to Top
